日本丰满人妻XXXXXHD,最近日本MV字幕免费高清在线 ,AV无码精品一区二区三区,色又黄又爽18禁免费网站现观看

  • 技術文章ARTICLE

    您當前的位置:首頁 > 技術文章 > 西門子CPU 1513F-1 PN

    西門子CPU 1513F-1 PN

    發布時間: 2018-12-11  點擊次數: 1008次

    概述

    • The CPU for standard and fail-safe applications with medium/high requirements for program/data storage in the S7-1500 controller product range
    • Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849
    • High processing speed for binary and floating-point arithmetic
    • Used as central controller in production lines with central and distributed I/O
    • Supports PROFIsafe in centralized and distributed configuration
    • PROFINET IO IRT interface with 2-port switch
    • PROFINET IO Controller for operating distributed I/O on PROFINET
    • PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
    • Isochronous mode

    Note:
    SIMATIC memory card required for operation of the CPU

    應用

    The CPU 1513F-1 PN is the CPU with a medium to large program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO Controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks.

    設計

    The CPU 1513F-1 PN has:

    • a powerful processor:
      The CPU achieves a command execution time as low as 40 ns per binary command.
    • extensive RAM:
      450 KB for program, 1.5 MB for data
    • SIMATIC Memory Cards as load memory;
      permit additional functions such as Datalog and Archive Flexible
    • Expansion capability:
      single-tier configuration with max. 32 modules (CPU + 31 modules)
    • Display with functions for the
      • Display of overview information such as station name, higher level designation, location designation, etc.
      • Display of diagnostic information
      • Display of module information
      • Display of display settings
      • Setting of IP addresses
      • Setting of date and time
      • Selection of the operating mode
      • Resetting of the CPU to factory settings
      • Disabling/enabling of the display
      • Enabling of protection levels
      • Display of safety mode, overall signature and date of the last download with signature change.
    • PROFINET IO IRT interface for connecting distributed I/O via PROFINET
    • Supports PROFIsafe in centralized and distributed configuration

    功能

    • Performance
      • Faster command processing, depending on the CPU type, language extensions and new data types
      • Even shorter response times of the CPUs due to considerably faster backplane bus
      • Powerful network connection:
        each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
    • Integrated technology
      • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
      • Support of speed-controlled and positioning axes as well as external encoders
      • Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
      • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
    • Security Integrated
      • Password-based know-how protection against unauthorized reading and modification of program blocks
      • Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
      • 4-level authorization concept:
        Communication to the HMI devices can also be restricted.
      • Manipulation protection:
        The controller recognizes changed or unauthorized transmissions of the engineering data.
    • Design and handling
      • Display of overview information:
        E.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
      • Possible operations on the display:
        set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
    • Integrated system diagnostics
      • System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and Web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
      • Integrated in the firmware of the CPU, no special configuration is required
    • SIMATIC Memory Card (required for operation of the CPU)
      • Used as plug-in load memory or for updating the firmware.
      • Additionally for storing additional documents or csv files (for recipes and archives)
      • Creation of data blocks for storage/reading of data via SFCs of the user program
亚洲性色精品一区二区在线| 性vodafonewifi| 日日碰狠狠添天天爽五月婷| 狠狠色噜噜狠狠狠狠97首创麻豆| 撅高屁股乖乖被学长cao视频| 久久99精品久久久久久噜噜| 婷婷丁香五月久久综合啪啪图区| 亚洲精品中字中出无码| 特级做A爰片毛片免费看| 无码熟妇人妻av在线| 亚洲V欧美V国产V在线观看 | chinese猛1打桩浪小辉| 亚洲乱码无码永久不卡在线| 无码精品一区二区三区在线| 天干夜天干天天天爽视频| 男女囗交大图片26交| 亚洲AV无码一区二区乱子伦| 国产爆乳无码一区二区麻豆| 真人高清实拍女处被破的视频| 久久人妻无码毛片a片麻豆| 香蕉久久久久久AV成人| 男女作爱免费网站| 小妖精腰细奶大h侍卫| 伊人成色综合人夜夜久久| freexxx欧美老妇| 色橹橹欧美在线观看视频高清| 日本少妇又色又爽又高潮| 杨门女将之浪荡合集| 熟妇五十路六十路息与子| 欧美激情视频| 高h禁伦餐桌上的肉伦np影片| AAA级久久久精品无码片 | 国产一区二区精品久久| 日日摸夜夜添狠狠添欧美| 丁香五月天缴情在线| 妓女精品国产噜噜亚洲av| 免费观看片的app下载| 欧美人与性动交α欧美精品| 97精品人妻一区二区三区香蕉| 欧洲AV无码放荡人妇网站| 黑人巨大无码中文字幕无码|